Water heaters are supposed to work really well. But if it is not delivering hot water in the way that it used to, then something is causing a problem. Water heater problems may also vary, depending on what type it is. It pays to have a water heater repair expert help you in finding out what’s wrong with your device.

Heater Problems

One of the most common issues with water heaters is that they no longer deliver the amount of hot water necessary for your daily needs. Sometimes, the water isn’t as hot as before. If these are the things that you’re experiencing, then you must call for a Palm Harbor water heater repair service.

Reduced Hot Water Supply

A water heater professional would know the most common fixes for faulty water heaters. For electric water tanks, what’s defective might be the lower element, but it can also be that the dip tube is missing. But if you have a gas model water heater, then it’s most likely the dip tube.

If none of those two parts is faulty but you’re experiencing reduced heat in your water heater, then the problem could be because the current cold weather conditions cause hot water to dilute a lot faster than usual. For that, you may need to upgrade your water heater to a higher capacity. Changing your shower head to one that has a lower flow rate may also work.

A Closer Look at the Problem

Water heater tanks are filled with hot water at around two-thirds of its total capacity. That’s 33 gallons of hot water if you’re using a 50 gallon water tank. Showerheads, on the other hand, usually dispense water at 2.5 gallons per minute. Doing the math, your 33 gallons of water would last you less than 14 minutes worth of hot water in the shower. How if you increase your tank’s capacity and use a shower head with a decreased flow rate, then you’ll have more hot water supply when taking a bath.

There’s something that you can do to determine whether your water heater is working at par or not. To test your water heater, make sure that no water is used overnight. Come morning, fill a bucket with 5 gallons of water from the tub spout. Check the water’s temperature. It should measure 160 degrees Fahrenheit at least.

Repeat the same process and count how many buckets of water you’re getting at the same temperature. Stop when you see a temperature drop of at least 20 degrees. See if the total gallons of water you recorded correspond to two-thirds of the capacity of your water tank. If it is significantly lesser than that, then you do have a problem with your water heater.

Installing a low flow shower head may be an easy solution to the problem as it can help you stretch out the usable hot water supply. It is still best to consult with an expert to get a permanent fix to the problem. Their expertise will help you achieve the results that you expect.